A Guide To Basic Troubleshooting Options For Your Electric Baseboard Heaters

28 December 2016
 Categories: , Blog


Anyone who has ever walked across a tile or hardwood floor first thing in the morning, when the baseboard heaters are not doing their job, knows how much that deficit can matter. If you had to deal with it today and would love to avoid doing so tomorrow, it is a good idea to know some common issues that could be causing the problem. As a result, it will behoove you to be aware of the information provided below.

Check The Breaker

It is easy for a malfunctioning breaker to be mistaken for a broken heater since the end result is the same for both problems. However, to determine what the cause of the problem is, you will need to take a few minutes to assess when the electrical issue occurs. The first step is to examine the wall where the heater plugs in to check for an uneven connection.

Specifically, you will want to turn off the thermostat control prior to opening the panel door and checking out the unit for any tripped breakers. If you are unsure as to whether or not a breaker was tripped, you can test the system. After turning off computers or other sensitive electronics, flip each circuit off and back on.

If the electricity is restored, the problem is likely to be that the use of the baseboard heater is overtaxing the electrical system and causing the problem. In that instance, it is best to have a licensed electrician examine your system and to avoid using the baseboard heaters in that room until the problem has been rectified.

If The Heater Is Getting Electricity And Still Doesn't Stay On

Once you have determined that the unit is getting electricity but your floors are still like ice, it is time to look to the functionality of the baseboard heater. One aspect to check for is the amount of airflow around each component of the year that stores or transfers energy.

One common component of an overheating baseboard heater is frequently the lack of airflow around the unit and between the different components. It could be as easy to fix as a dust build-up that just needs to be removed or as complex as an impaired internal thermostat. The damaged thermostat can be remedied quite easily, even if you are not overly familiar with similar tasks.

You will need to disconnect the internal unit and install an external unit nearby to evaluate both the temperature of the room and the warmed air leaving the heater. If your floors, and by extension, the room being heated, is still not at the temperature you expect, it is time to speak with a professional from a company like Feldman Brothers Electrical Supply Co.

In conclusion, baseboard heat is very important during the winter, especially if one or more of the rooms in your home lack carpet. Before paying an electrician to diagnose and address the issue, it will be helpful to be aware of the above choices for troubleshooting the malfunctioning units.

 

 


Share